Find What You're Looking For
Menu
Capabilities and Equipment

INSPECTION EQUIPMENT

 

CALIBRATED INSTRUMENTS FOR FINAL ACCEPTANCE

Inside Micrometers

  • 1 ” – 32″ S/N ST3
  • 1 ” – 32″ S/N ST7
  • 1 ” – 32″ S/N ST16
  • 1 ” – 32″ S/N ST25
  • 2″ – 12″ S/N ST11
  • 2″ – 12″ S/N ID 24
  • 4″ – 40″ S/N ID15
  • 4″ – 40″ S/N ID26
  • 4″ – 60″ S/N ST8
  • 6″ – 300″ S/N ST12
  • 8″ – 33″ S/N ID17

Outside Micrometers

  • 0″ – 1″ S/N ST1-1
  • 0″ – 1″ S/N ST2-1
  • 0″ – 6″ S/N OD 14
  • 1″ – 2″ S/N ST1-2
  • 1″ – 2″ S/N ST2-2
  • 2″ – 3″ S/N ST1-3
  • 2″ – 3″ S/N ST2-3
  • 3″ – 4″ S/N ST1-4
  • 3″ – 4″ S/N ST2-4
  • 4″ – 5″ S/N ST1-5
  • 4″ – 5″ S/N ST2-5
  • 5″ – 6″ S/N ST1-6
  • 5″ – 6″ S/N ST2-6
  • 6″ – 7″ S/N ST1-7
  • 6″ – 7″ S/N ST13-1
  • 7″ – 8″ S/N ST1-8
  • 7″ – 8″ S/N ST13-2
  • 8″ – 9″ S/N ST1-9
  • 8″ – 9″ S/N ST13-3
  • 9″ – 10″ S/N ST1-10
  • 9″ – 10″ S/N ST13-4
  • 10″ – 11″ S/N ST1-11
  • 10″ – 11″ S/N ST13-5
  • 11″ – 12″ S/N ST1-12
  • 11″ – 12″ S/N ST13-6
  • 12″ – 16″ S/N OD11
  • 12″ – 16″ S/N OD12
  • 12″ – 18″ S/N ST1-13
  • 16″ – 20″ S/N OD9
  • 16″ – 20″ S/N OD10
  • 18″ – 24″ S/N OD8
  • 20″ – 24″ S/N OD7
  • 24″ – 30″ S/N OD6

Outside Micrometers – Continued

  • 30″ – 36″ S/N OD4
  • 30″ – 36″ S/N OD5
  • 36″ – 42″ S/N OD3
  • 42″ – 48″ S/N OD2
  • 48″ – 54″ S/N OD1

Micrometer Standards

  • 1″ – 24″ S/N S1/S24

Depth Micrometers

  • 0″ – 6″ S/N DM23
  • 0″ – 12″ S/N ST1
  • 0″ – 12″ S/N DM18

Calipers

  • 0″ – 6″ S/N ST9
  • 0″ – 12″ S/N ST5
  • 0″ – 12″ S/N ST10
  • 0″ – 12″ S/N VC22
  • 0″ – 12″ S/N VC23
  • 0″ – 24″ S/N ST10
  • 0″ – 24″ S/N VC21
  • 0″ – 24″ S/N VC24
  • 0″ – 40″ S/N VC20
  • 0″ – 48″ S/N VC19

Gage Blocks

  • Gage Block Set S/N SSD-1 (21885.1)
  • Gage Block Set SMB-1 (71888.5)

Height Gage

  • 40″ Height Gate S/N HG-1

Master Level

  • Starrett S/N ML-1
  • Starrett S/N ML-2

Hardness Tester

  • Equotip S/N 714-1036

Humidity and Temperature Recorder

  • Honeywell 7 Day Chart S/N U1-5

Miscellaneous Instruments

  • 3 1/4″ – 4 1/4″ Dial Caliper Gage S/N DC001
  • .4″ – 1.4″ Dial Caliper Gage S/N DC002
  • Dial Indicator Tester S/N L-1-3
  • Besttest Indicator S/N D1-1
  • 72″ Straight Edge S/N L1-2
  • 84″ – 96″ Pi Tape S/N P1
  • 84″ – 96″ Pi Tape S/N P2
  • Brown and Sharp 36″ Square S/N R2-1
  • Williams Torque Wrench S/N U1-7
  • 36″ x 48″ Surface Table S/N 0295-11606
  • Thread Wire Set S/N R1-5
  • Pressure Gage 0-200 PSI S/N PS200E
  • Pressure Gage 0-6000 PSI S/N PS6000

Nondestructive Examination

  • MT Machine S/N 4545
  • MT Machine S/N 6004
  • MT Machine S/N 10192
  • MT Machine S/N 11151
  • USK-6 UT Instrument S/N R1-6
  • USL – 38 UT Instrument S/N R1-7
  • USN52L UT Instrument S/N 00LP4L
  • USMGO UT Instrument S/N 1001063
  • USMGO UT Instrument S/N 11030034

Optical

  • Wild T2 Theodolite S/N 322491
  • K & E Tilting Level S/N 300220
  • LDDM Laser System S/N LDDM
  • K & E Transit Level S/N 412050
  • K & E Transit Level S/N 209278

Weld Machine Testers

  • AC Ammeter Type AX S/N 65286
  • Digital Multimeter S/N 50860669

Coatings

  • Positector 6000 F S/N 632179
  • Positector 6000 DFT Probe S/N 228889
  • Positector 6000 DFT Probe S/N 294799
  • Positector 6000 DPM Probe S/N 293027
  • PATTI Quantum Analog Adhesion Tester Piston Model F-4 S/N 1-0349
  • PATTI Quantum Analog Adhesion Tester Piston Model F-4 S/N 2-0349
  • Bacharach Sling Psychrometer S/N K59952
  • Certified Coating Thickness Calibration Standards S/N 32370

Thread Plug Gages “GO” and “NO GO”

  • (6) – 32 UNF-3B S/N GN 69
  • (8) – 32 UNC-3B S/N GN 75
  • (10) -32 UNF-3B S/N GN 70
  • (10) – 32 UNF-2B S/N GN 33
  • 1/4″ – 20 UNC-2B S/N GN 30
  • 1/4″ – 28 UNF-2B S/N GN 32A
  • 1/4″ – 28-3B S/N GN 31
  • 5/16″- 18-2B S/N GN 10
  • 5/16″ -24 UNF-2B S/N GN 73
  • 5/16″ -24 UNF-2B (Helicoil) S/N GN 76
  • 3/8″ – 16-2B S/N GN 9
  • 7/17″- 14 UNC-2B S/N GN 35
  • 1/2″ – 13 UNC-2B S/N GN 34
  • 1/2″ – 13 UNC-3B S/N GN 74
  • 1/2″ – 20 UNF-2B S/N GN 67
  • 9/16″ -12 -2B S/N GN 7
  • 5/8″ -11 UNC-2B S/N GN 60
  • 5/8″ -11 UNC-3B S/N GN 48
  • 3/4″ -10 -2B S/N GN 6
  • 3/4″ -10- 2B S/N GN 50
  • 3/4″ -16 UNF-2B S/N GN 29
  • 3/4″ -16-2B S/N GN 23
  • 3/4″ -10 UNC -3B S/N GN 68
  • 7/8″ -9-2B S/N GN 5
  • 7/8″ -9-2B S/N GN 25
  • 7/8″ -9 UNC-2B S/N GN 37
  • 1″ -8-1B S/N GN 26
  • 1″ -8-2B S/N GN 4
  • 1″ -8 UNC-2B S/N GN 38
  • 1-1/8″ -7 UNC-2B S/N GN 49
  • 1-1/8″ -8 UNC-2B S/N GN 59
  • 1-1/4″ -7-2B S/N GN 2
  • 1-1/4″ -7 UNC-2B S/N GN 58
  • 1-1/4″ -8 UNS-2B S/N GN 36
  • 1-1/4″ -12 UNF-2B S/N GN 3
  • 1-3/8″ -12-2B S/N GN 28
  • 1-3/8″ -12-3B S/N GN 1
  • 1-1/2″ – 6-2B S/N GN 32
  • 1-1/2″ – 8 UN-2B S/N GN 52
  • 1-1/2″ – 12 UNF-2B S/N GN 72
  • 1-5/8″ – 8 UN-2B S/N GN53

Thread Plug Gages “GO and “NO GO” – Continued

  • 1-3/4″ – 8 UN-2B S/N GN 46
  • 2″ – 8 UN-2B S/N GN 51
  • 2-1/2″ -8UN-2B S/N GN 54
  • M5 x 0.8-6H S/N GN 63
  • M6 x 1.0-6H S/N GN 45
  • M8 x 1.25-6H S/N GN62
  • M10 x 1.50-6H S/N GN 43
  • M12 x 1.75-6H S/N GN 44
  • M14 x 1.5-6H S/N GN 57
  • M14 x 2.0-6H S/N GN 64
  • M16 x 2.0-6H S/N GN 42
  • M20 x 2.50-6H S/N GN 41
  • M20 x 1.50 -6H S/N GN 66
  • M22 x 2.5-6H S/N GN61
  • M24 x 3.0-6H S/N 47
  • M27 x 3.0-6H S/N GN 65
  • M30 x 3.5-6H S/N GN 56
  • M36 x 4.0-6H S/N GN 55
  • 1/4″- 18 NPTF-L1 S/N GN 39
  • 1/32″ -14 NPT-L1 S/N GN 71
  • 1″ -11-1/2 NPT S/N GN 40

Ring Thread Gages “GO” and “NO GO”

  • 1″ -8 UNC-2A “GO” S/N RG 1
  • 1″ -8 UNC-2A “NO GO” S/N RGN 1
  • 1-1/8″ -7 UNC-2A “GO” S/N RG 2
  • 1-1/8″ -7 UNC-2A “NO GO” S/N RGN 2
  • 1-3/4″ -5 UNC-2A “GO” S/N RG 3
  • 1-3/4″ -5 UNC-2A “NO GO” S/N RGN 3