INSPECTION EQUIPMENT

NOTE: "In addition to our extensive Inspection equipment listed below, Steward Machine is proud to announce the installation of the only Maag MCR-500, the world's most accurate gear checker, in existence. The MCR-500 is computer controlled and measures the lead, profile, tooth to tooth spacing, accumulated error, and undulations on external gears to an accuracy of .00001 inches. The MCR-500 can handle up to a 44 inch external face length, a 14 inch internal face length, a maximum diameter of 200 inches, a minimum diameter of 4 inches, and a maximum weight of 110,000 pounds."

CALIBRATED INSTRUMENTS FOR FINAL ACCEPTANCE

Inside Micrometers

  • 1 " - 32" S/N ST3
  • 1 " - 32" S/N ST7
  • 1 " - 32" S/N ST16
  • 1 " - 32" S/N ST25
  • 2" - 12" S/N ST11
  • 2" - 12" S/N ID 24
  • 4" - 40" S/N ID15
  • 4" - 40" S/N ID26
  • 4" - 60" S/N ST8
  • 6" - 300" S/N ST12
  • 8" - 33" S/N ID17

Outside Micrometers

  • 0" - 1" S/N ST1-1
  • 0" - 1" S/N ST2-1
  • 0" - 6" S/N OD 14
  • 1" - 2" S/N ST1-2
  • 1" - 2" S/N ST2-2
  • 2" - 3" S/N ST1-3
  • 2" - 3" S/N ST2-3
  • 3" - 4" S/N ST1-4
  • 3" - 4" S/N ST2-4
  • 4" - 5" S/N ST1-5
  • 4" - 5" S/N ST2-5
  • 5" - 6" S/N ST1-6
  • 5" - 6" S/N ST2-6
  • 6" - 7" S/N ST1-7
  • 6" - 7" S/N ST13-1
  • 7" - 8" S/N ST1-8
  • 7" - 8" S/N ST13-2
  • 8" - 9" S/N ST1-9
  • 8" - 9" S/N ST13-3
  • 9" - 10" S/N ST1-10
  • 9" - 10" S/N ST13-4
  • 10" - 11" S/N ST1-11
  • 10" - 11" S/N ST13-5
  • 11" - 12" S/N ST1-12
  • 11" - 12" S/N ST13-6
  • 12" - 16" S/N OD11
  • 12" - 16" S/N OD12
  • 12" - 18" S/N ST1-13
  • 16" - 20" S/N OD9
  • 16" - 20" S/N OD10
  • 18" - 24" S/N OD8
  • 20" - 24" S/N OD7
  • 24" - 30" S/N OD6

Outside Micrometers - Continued

  • 30" - 36" S/N OD4
  • 30" - 36" S/N OD5
  • 36" - 42" S/N OD3
  • 42" - 48" S/N OD2
  • 48" - 54" S/N OD1

Micrometer Standards

  • 1" - 24" S/N S1/S24

Depth Micrometers

  • 0" - 6" S/N DM23
  • 0" - 12" S/N ST1
  • 0" - 12" S/N DM18

Calipers

  • 0" - 6" S/N ST9
  • 0" - 12" S/N ST5
  • 0" - 12" S/N ST10
  • 0" - 12" S/N VC22
  • 0" - 12" S/N VC23
  • 0" - 24" S/N ST10
  • 0" - 24" S/N VC21
  • 0" - 24" S/N VC24
  • 0" - 40" S/N VC20
  • 0" - 48" S/N VC19

Gage Blocks

  • Gage Block Set S/N SSD-1 (21885.1)
  • Gage Block Set SMB-1 (71888.5)

Height Gage

  • 40" Height Gate S/N HG-1

Master Level

  • Starrett S/N ML-1
  • Starrett S/N ML-2

Hardness Tester

  • Equotip S/N 714-1036

Humidity and Temperature Recorder

  • Honeywell 7 Day Chart S/N U1-5

Miscellaneous Instruments

  • 3 1/4" - 4 1/4" Dial Caliper Gage S/N DC001
  • .4" - 1.4" Dial Caliper Gage S/N DC002
  • Dial Indicator Tester S/N L-1-3
  • Besttest Indicator S/N D1-1
  • 72" Straight Edge S/N L1-2
  • 84" - 96" Pi Tape S/N P1
  • 84" - 96" Pi Tape S/N P2
  • Brown and Sharp 36" Square S/N R2-1
  • Williams Torque Wrench S/N U1-7
  • 36" x 48" Surface Table S/N 0295-11606
  • Thread Wire Set S/N R1-5
  • Pressure Gage 0-200 PSI S/N PS200E
  • Pressure Gage 0-6000 PSI S/N PS6000

Nondestructive Examination

  • MT Machine S/N 4545
  • MT Machine S/N 6004
  • MT Machine S/N 10192
  • MT Machine S/N 11151
  • USK-6 UT Instrument S/N R1-6
  • USL - 38 UT Instrument S/N R1-7
  • USM52L UT Instrument S/N 00LP4L
  • USN52L UT Instrument S/N 00LNPY

Optical

  • Wild T2 Theodolite S/N 322491
  • K & E Tilting Level S/N 300220
  • LDDM Laser System S/N LDDM
  • K & E Transit Level S/N 412050
  • K & E Transit Level S/N 209278

Weld Machine Testers

  • AC Ammeter Type AX S/N 65286
  • Digital Multimeter S/N 50860669

Painting

  • Mikrotest Coating Thickness Gage S/N K49328
  • Mikrotest Coating Thickness Gage S/N 32814
  • Mikrotest Coating Thickness Gage S/N 117961
  • Bacharach Sling Psychrometer S/N K59952
  • Certified Coating Thickness Calibration Standards S/N 32370

Thread Plug Gages "GO" and "NO GO"

  • (6) - 32 UNF-3B S/N GN 69
  • (8) - 32 UNC-3B S/N GN 75
  • (10) -32 UNF-3B S/N GN 70
  • (10) - 32 UNF-2B S/N GN 33
  • 1/4" - 20 UNC-2B S/N GN 30
  • 1/4" - 28 UNF-2B S/N GN 32A
  • 1/4" - 28-3B S/N GN 31
  • 5/16"- 18-2B S/N GN 10
  • 5/16" -24 UNF-2B S/N GN 73
  • 5/16" -24 UNF-2B (Helicoil) S/N GN 76
  • 3/8" - 16-2B S/N GN 9
  • 7/17"- 14 UNC-2B S/N GN 35
  • 1/2" - 13 UNC-2B S/N GN 34
  • 1/2" - 13 UNC-3B S/N GN 74
  • 1/2" - 20 UNF-2B S/N GN 67
  • 9/16" -12 -2B S/N GN 7
  • 5/8" -11 UNC-2B S/N GN 60
  • 5/8" -11 UNC-3B S/N GN 48
  • 3/4" -10 -2B S/N GN 6
  • 3/4" -10- 2B S/N GN 50
  • 3/4" -16 UNF-2B S/N GN 29
  • 3/4" -16-2B S/N GN 23
  • 3/4" -10 UNC -3B S/N GN 68
  • 7/8" -9-2B S/N GN 5
  • 7/8" -9-2B S/N GN 25
  • 7/8" -9 UNC-2B S/N GN 37
  • 1" -8-1B S/N GN 26
  • 1" -8-2B S/N GN 4
  • 1" -8 UNC-2B S/N GN 38
  • 1-1/8" -7 UNC-2B S/N GN 49
  • 1-1/8" -8 UNC-2B S/N GN 59
  • 1-1/4" -7-2B S/N GN 2
  • 1-1/4" -7 UNC-2B S/N GN 58
  • 1-1/4" -8 UNS-2B S/N GN 36
  • 1-1/4" -12 UNF-2B S/N GN 3
  • 1-3/8" -12-2B S/N GN 28
  • 1-3/8" -12-3B S/N GN 1
  • 1-1/2" - 6-2B S/N GN 32
  • 1-1/2" - 8 UN-2B S/N GN 52
  • 1-1/2" - 12 UNF-2B S/N GN 72
  • 1-5/8" - 8 UN-2B S/N GN53

Thread Plug Gages "GO and "NO GO" - Continued

  • 1-3/4" - 8 UN-2B S/N GN 46
  • 2" - 8 UN-2B S/N GN 51
  • 2-1/2" -8UN-2B S/N GN 54
  • M5 x 0.8-6H S/N GN 63
  • M6 x 1.0-6H S/N GN 45
  • M8 x 1.25-6H S/N GN62
  • M10 x 1.50-6H S/N GN 43
  • M12 x 1.75-6H S/N GN 44
  • M14 x 1.5-6H S/N GN 57
  • M14 x 2.0-6H S/N GN 64
  • M16 x 2.0-6H S/N GN 42
  • M20 x 2.50-6H S/N GN 41
  • M20 x 1.50 -6H S/N GN 66
  • M22 x 2.5-6H S/N GN61
  • M24 x 3.0-6H S/N 47
  • M27 x 3.0-6H S/N GN 65
  • M30 x 3.5-6H S/N GN 56
  • M36 x 4.0-6H S/N GN 55
  • 1/4"- 18 NPTF-L1 S/N GN 39
  • 1/32" -14 NPT-L1 S/N GN 71
  • 1" -11-1/2 NPT S/N GN 40

Ring Thread Gages "GO" and "NO GO"

  • 1" -8 UNC-2A "GO" S/N RG 1
  • 1" -8 UNC-2A "NO GO" S/N RGN 1
  • 1-1/8" -7 UNC-2A "GO" S/N RG 2
  • 1-1/8" -7 UNC-2A "NO GO" S/N RGN 2
  • 1-3/4" -5 UNC-2A "GO" S/N RG 3
  • 1-3/4" -5 UNC-2A "NO GO" S/N RGN 3
 
© Copyright Steward Machine  All Rights Reserved